Asus TUF Gaming Display Port No Signal Issue (Easy Fix)

asus tuf gaming display port no signal

Asus TUF Gaming Display Port No Signal issue is very common among ASUS TUF users. In this article, I will tell you what causes this issue and how you can solve it without the need for tools or getting in touch with customer care.

When the computer is fully turned on and you plug in an Asus monitor to your computer, you expect to see the Windows boot menu. However, you are greeted with a blank screen. You might also hear a beeping sound or an alarm that signals that there’s no video signal going through the monitor. This can be particularly frustrating for gamers who need their screens to connect to their PCs for gaming or watching movies.

No Signal is the problem that affects many Asus users, and yes, you are not the only one dealing with it. Asus Tuf gaming Display Port No Signal is a serious issue on most TUF monitors. The reason is that this problem is due to a hardware issue. Even though the warranty covers the ASUS Monitor No Signal issue, the manufacturers themselves don’t have the ways to troubleshoot this issue. Every Asus display includes a dedicated DisplayPort connection. But when this port is used to connect your monitor to a computer, it may not work. If you’re using an Asus monitor together with an AMD or Intel processor and your computer has Windows 10 installed, here’s how you can fix the no signal issue.

Methods To Resolve The Asus TUF Gaming Display Port No signal Issue

The no display issue occurs due to some common reasons. The most probable cause for the Asus display port No Signal Issue is a loose connection between the computer and the monitor. If you check the HDMI cable from both ends and it is properly connected, then it might be a faulty driver. You can resolve the problem by updating the graphics card driver.

Method 01: Replacing the graphics card with a new one

In case changing the graphics card driver doesn’t resolve the problem, you need to replace your display port with a compatible one.

To replace the port, you will require a soldering iron, solder, flux, and screwdrivers. The procedure to replace the display Port depends upon your Monitor model. Follow the following steps to replace your display Port on the Asus monitor:

Check if there is any physical damage to the cable or port. This can be identified by looking at the pins of both ends of the cable. If they are damaged or bent inwards, it might cause issues while connecting with another device.

Method 02: Detaching the display port and then reconnecting

There are several methods to fix the Asus Monitor display port No Display Issue.  You can troubleshoot it using the solution provided in the following paragraph.

Every time you plug the display cable into the laptop’s port, nothing shows up on the screen, but when you detach it, the screen flashes on and off as if there was no connection. The solution is as simple as unplugging and reconnecting the power cable. Unplug the power cord and the video cable from the back of the monitor and then reconnect both of them after a few seconds.

This will solve display problems caused by loose connections between the two devices. This should fix the no signal issue on the ASUS monitor. Once the monitor boots up, I suggest you check the display settings to see if everything is alright.

Method 03: Reset the display port settings to defaults:

There may be many reasons behind the Asus monitor not displaying the issue. If your Asus monitor is not displaying anything or the screen is blank and you are having a problem with the display/monitor, then firstly, you will have to determine whether the display cable is connected to another monitor that’s working.

After a system restart or power outage, the monitor may stop displaying anything. If this has happened to you, then you can fix your ASUS monitor by resetting its display settings to factory defaults. Then Try to see if the monitor is receiving power.

If the monitor is receiving power, then do a factory reset to resolve the issue. To bring up the On-screen menu, first push the on-screen menu button on the display. Then choose Factory Reset using the buttons on the monitor.

Method 04: Update the graphics and chipset:

The problem is most likely caused by faulty chipset and graphics drivers. If the issue persists, update the drivers. If you don’t have the time, patience, or technical knowledge to update drivers manually, Driver Easy can do it for you.

Driver Easy will automatically detect compatible drivers for your system. You don’t have to download and install the wrong driver or worry about making a mistake when installing it as long as you know your operating system. Driver Easy, whether free or paid, allows you to automatically update your drivers.

  • Launch Driver Easy and click Scan Now. Driver Easy will then scan your computer for any problematic drivers.
  • Click the Update button next to a flagged driver to automatically download the correct version (the chipset driver or graphics driver). You can then install it manually.

Conclusion

This is how you can fix the Asus TUF Gaming Display Port No Signal Issue on your monitor, but if these methods still don’t work then you should go see a professional or claim warranty.

Leave a Reply

Your email address will not be published.